Hatsuta Kakusanki Co., Ltd.[HATSUTA]

VARIETY LINEUP

| HGR-40A | SGR-40B | SGR-40B Exclusive Trailer | HVS-1 | HR-1 | HD-302MR |
| HWS-2 s| SF-508 SF-530 | Wide Flat Nozzle / Boomless Flat Fan Nozzle | SAND TRAPPER II |

HGR-40A Green Roller



Features

  • Instantly engages tire drive for relocation.
  • Employs a special form roller for smoothly rolling raised or strongly undulated greens.
  • Completely hydraulic for easy operation.

Download (Single goods catalog PDF)
(327KB)

Specifications
Details/Model HGR-40A
Full length x Full width x Full height (mm) 2050 x 1300 x 1370
Dry weight (kg) 500
Engine Model Vanguard 305447
Ratings output kW (PS) 11.8 (16)
Emissions (cc) 480
Fuel (L) Unleaded gasoline (18.0)
Drive system Drive train HST
Travel speed (km/h) 0~15
Front tires 13-6.00-8
Rear tires 16-6.50-8
Hydraulic oil (L) ISO VG46# (13.0)
Roller Roller width 960
Roller number 3 (Rubber roller x 2)


PageTop↑

SGR-40B Green Roller



Features

  • Since it is a light weight and the low center of gravity, there are also few damages to a turf and the operation which was safe and was stabilized is possible for them.
  • Comfortable reclining seat with adjustable cushion.
  • Side break for safe stopping.

Download (Single goods catalog PDF)
(700KB)

Specifications
Details/Model SGR-40B
Full length x Full width x Full height (mm) 780 x 1070 x 1170
Dry weight (kg) 280
Engine Model Vanguard
Ratings output kW (PS) 4.8 (6.5)
Emissions (cc) 205
Fuel (L) Unleaded gasoline (3.8)
Drive system Drive train HST
Travel speed (km/h) 0~7
Front tires -
Rear tires -
Hydraulic oil (L) ISO VG46# (2.5)
Roller Roller width 900
Roller number 3 (Rubber roller x 1)


PageTop↑

SGR-40B Exclusive Trailer



The smooth move of l <SGR-40B> is achieved.

Features

  • It is possible to install it in all the golf course work cars.
  • The unloading is also smooth.

Download (Single goods catalog PDF)
(684KB)

Specifications
Details/Model SGR-40B Exclusive Trailer
Full length x Full width x Full height (mm) 2895 x 1515 x 1045
Size of carrier (mm) 995 (length) x 1195 (width) x 195(height)

  • The vehicle that can be pulled becomes only <SGR-40A>.


PageTop↑

HVS-1 Vibrating Sieve

Features

  • Can be used continuously when in conjunction with a conveyor belt.
  • Makes fine grain sand/soil at a high rate of efficiency using strong coupling oscillation.
Specifications
Details/Model HVS-1
Full length x Full width x Full height (mm) 4300 x 1250 x 1600
Dry weight (kg) 350
Engine Type Vanguard 130G
Output kW (PS) 4.8 (6.5)
Emissions (cc) 208
Fuel (L) 3.1
Work system Sieve mesh (L x W) (mm) 1200 x 740 (5mm wire mesh)
Conveyor (L x W) (mm) 4000 x 300
Processing capacity (m3/h) 8


PageTop↑

HRS Rotating Soil Sieve


Features

  • Broad sieve for efficient sifting.
  • Rotating brush to prevent clogging.
    *Replaceable sieve mesh
Specifications
Details/Model HRS
Full length x Full width x Full height (mm) 3000 x 1310 x 2110
Dry weight (kg) 380
Engine Type Vanguard 130G
Output kW (PS) 4.8 (6.5)
Emissions (cc) 208
Fuel (L) 3.1
Processing capacity (m3/h) 15


PageTop↑

RENOVATER HR-1


Features

  • The soil of the ventilation and good, and fertilization, as well as promote the control effect.
    I also use the permeability defective portion, it is possible to change the working width tailored to your needs.
Specifications
Details/Model HR-1
Full length x Full width x Full height (mm) 2550 x 2520 x 950
Dry weight (kg) 910
working width (mm) 1760
Number of blade 120
Spoon nail 60
Spoon edge 60


PageTop↑

HD-302MR Fertilizer Spreader

Features

  • Good maneuverability for spreading fertilizer on fairways and slopes.
  • The large fan blows fertilizer distances of 25 m.
  • Stainless steel parts are used to prevent corrosion.
  • Blow angle and spreading rate can be freely adjusted from handy switches.

Download (Single goods catalog PDF)
(204KB)


Specifications
Details/Model HD-302MR
Full length x Full width x Full height (mm) 1500 x 1200 x 1750
Dry weight (kg) 300
Applicable tractors 22.1 kW (30 PS) or more
Hopper capacity (kg) 300
Maximum blow rate (kg/min) 35
Spray width (m) 25


PageTop↑

New Walk Sprayer HWS-2


Features

  • It corresponds to all chips according to the usage.
  • The application width is free in wide division into three. (1.5m/2.25m/3m)
  • All piping is made of corrosion-tough stainless steel. (Part is excluded.)
  • The height of the scatter is fixed by three-wheel tires adoption.
  • The speedometer to be able to confirm the work speed is equipped normally.
  • The movement between courses one-touch is installed in the tank car. <option>

Download (Single goods catalog PDF)
(156KB)

It corresponds to the course where the use of sprayer was difficult.
It doesn't become irregular and Evenly sprays water.

Specifications
Details/Model HWS-2
Full length x Full width (at storage) x Full height (mm) 1350 x 3000(1580) x 950
Dry weight (kg) 22


PageTop↑

SF Series Super Flat 508 Super Flat 530 (For lawns)

Features

  • Evenly sprays water without drifting.
  • Replaceable nozzle heads. (Not available for SF-460)
  • Full range adjustable flow rate from low to high.


*The above reference flowrates differ greatly according to spray method, pressure, etc.


Flow rate table

Super Flat 508
Head pressure (MPa) 0.3 0.4 0.5 0.8 1
Flow rate (L/min) 6.16 7.19 8.17 10.5 11.6
 
Super Flat 515
Head pressure (MPa) 0.4 0.5 0.8 1 1.5
Flow rate (L/min) 13.6 15.4 19.2 21.5 26.2
 
Super Flat 530
Head pressure (MPa) 0.4 0.5 0.8 1 1.5
Flow rate (L/min) 26.5 30.2 38 43.1 52.8
 
Super Flat 460
Head pressure (MPa) 0.3 0.4 0.5 0.6 0.8
Flow rate (L/min) 46 59 69 78 101


PageTop↑

Wide Flat Nozzle / Boomless Flat Fan Nozzle

Wide Flat Nozzle


Features

  • The spray width can changed by raising and lowering the nozzle height.
  • The amount of water can be nade with one nozzle. <Large capacity pump>
  • Working without concern for interference between boom bar (nozzle) and turf surface.

Download (Single goods catalog PDF)
(1.1MB)

Wide Flat Nozzle
Recommended spray wide 3~8m
Basic spray volume 100~200cc/m2(work speed:8km/h)

*Relative to our company



Boomless Flat Fan Nozzle


Features

  • Work efficiency is improved because spreading width is wider than boom.
  • Less wind influence.
  • Working without concern for interference between boom bar (nozzle) and turf surface.

Download (Single goods catalog PDF)
(1.1MB)

Boomless Flat Fan Nozzle
Recommended spray wide 8~10m
Basic spray volume 50~100cc/m2(work speed:8km/h)

*Relative to our company



PageTop↑

SAND TRAPPER II

To resume prompt play after rain and to reduce management costs.

SAND TRAPPER

http://sandtrapper.com/


PageTop↑